Lumbung Pustaka UNY: No conditions. Results ordered -Date Deposited. 2024-03-28T12:25:06ZEPrintshttp://eprints.uny.ac.id/apw_template/images/sitelogo.pnghttps://eprints.uny.ac.id/2013-02-21T01:13:55Z2019-01-29T18:29:42Zhttp://eprints.uny.ac.id/id/eprint/10161This item is in the repository with the URL: http://eprints.uny.ac.id/id/eprint/101612013-02-21T01:13:55ZPENGENDALI PINTU GERBANG MENGGUNAKAN BLUETOOTH BERBASIS MIKROKONTROLER ATMEGA 8 Tujuan membuat “pengendali pintu gerbang menggunakan bluetooth berbasis mikrokontroler ATmega 8” adalah untuk merealisasikan perancangan hardware, software dan mengetahui unjuk kerja pengendali pintu gerbang.
Prinsip kerja pengendali pintu gerbang menggunakan bluetooth berbasis mikrokontroler ATmega 8 yaitu pengiriman kode karakter melalui bluetooth kemudian diproses pada mikrokontroler menjadi bentuk keputusan, selanjutnya dari energi listrik diubah menjadi gerakan mekanis pada motor servo. Adapun metode yang digunakan pada pembuatan alat ini adalah metode eksperimental, dengang metode ini didapat teknik perancangan yang terdiri dari (1) Identifikasi kebutuhan yaitu mengenali kebutuhan apa saja yang dibutuhkan pada pembuatan alat. (2) Analisis kebutuhan yaitu menganalisa semua kebutuhan pada alat sebelum proses perancangan alat, (3) Perancangan perangkat keras dan perangkat lunak yaitu merancang dan mempersiapkan bahan apa saja yang digunakan untuk membuat alat (4) Pembuatan alat yaitu proses penyatuan semua bahan hingga membentuk alat dan (5) Pengujian alat yaitu menguji kinerja alat.
Perangkat keras (hardware) yang digunakan adalah smartphone sebagai pembangkit kode karakter kemudian diteruskan melalui modul bluetooth menuju mikrokontroler untuk diproses menjadi keputusan yang diterima oleh motor servo untuk diubah menjadi gerakan mekanis yang menggerakan pintu gerbang. Perangkat lunak yang digunakan yaitu Arduino, Amarino dan Eagle. Dengan menggunakan pemrograman yang terdapat pada Arduino berupa Program inisialilasi, program setup, program scanning dan program masukan. Alat ini sudah dapat bekerja sesuai perintah. Hal ini ditunjukan pada pintu gerbang sudah dapat dikendalikan dari jarak tertentu. Pintu gerbang dapat membuka dan menutup sesuai dengan instruksi yang diberikan. Daun pintu gerbang bergerak setengah melingkar atau membentuk sudut 90° dari sumbunya. Pengunci sudah dapat mengunci secara otomatis, dan password sudah dapat berfungsi dengan baik.
Gustaman Teguh Arif 2013-02-18T04:36:30Z2019-01-29T02:43:45Zhttp://eprints.uny.ac.id/id/eprint/10147This item is in the repository with the URL: http://eprints.uny.ac.id/id/eprint/101472013-02-18T04:36:30ZGATEWAY CONTROLLER USES BLUETOOTH
BASED ON THE ATMEGA 8The purpose of making a "gateway controller uses bluetooth based on the
ATmega 8" microcontroller is to realize the design of hardware and software and
discover the performance of the control gate.
The working principle of a gateway controller uses bluetooth based on the
ATmega 8 microcontroller which sends character codes via bluetooth and are then
processed in the microcontroller to form a decision. Then the electrical energy is
converted into mechanical motion produced by the servo motor. The method used
in the manufacture of these tools is an experimental method. By using this
method there is obtained a design technique that consists of (1) identification of
requirements, which is helpful to recognize what elements are needed in the
manufacture of the mentioned tools. (2) Analysis of needs, which is to analyze all
the elements needed in building the tool before the process of designing, (3)
designing hardware and software, which is the activity of designing and preparing
any material used to build the tool (4) The manufacture of toolsm, which is a
process to integrate all of the elements to build the tool and (5) Testing tools,
which is the testing of the performance of the tool.
The hardware used is a smartphone as a character code generator which is then
routed through the bluetooth module into the microcontroller. The code then is
processed into decision received by the servo motors to be converted into
mechanical motion that drives the gate. The softwares used are Arduino, Amarino
and Eagle. By using the programs contained in Arduino, which are in the forms of
Initialization Program, setup program, scanning programs and inputprogram, the
tool is able to work as instructed. It has been shown at the gate can be controlled
from a distance. The gate can be opened and closed in accordance with the
instructions given. The gate knob is moving semi-circular or forming an angle of
90 ° from its axis. The lock is also able to lock automatically, and the password
can function properly.
Password : ATmega 8, Smartphone, Bluetooth csr bc417143, Servo MotorGustaman Teguh Arif